If you translate this INI file to your language just name it any_name.ini and put it in this directory.

[Global]
bCancel=Cancel
bOk=OK
Channel=Channel
Channels=Channels
Tp=Tp
Transponder=Transponder
Transponders=Transponders
Selected=Selected

[Dialogs]
WrongF=Wrong file!!!
Question=Question
SaveChange=Save changes?
FileNot=File not exists:
DelMRUFile=Do you want delete it from MRU list?
CRCalc=CRC calculated.
WrongV=Wrong value!!!
Continue=Continue?
Warn=Warning!
tpWarn1=There are at least two transponders with the same TID and NID.
tpWarn2=Some channels may not work.
maxCh=Too many channels on a list. Some of them won't be saved.
maxTp=Too many transponders on a list. Some of them won't be saved.

[Config]
Config=Configuration
grRWOpts=Read/Write options
lPort=Port
lBaud=Baud rate
lDelay=Delay
lTuner=Tuner
lWrite=Write method
grHex=View in HEX
cfgSid=SID
cfgTid=TID
cfgNid=NID
grOpts=Options
lLang=Language
chSave=Save invalid base channel params
chSelect=Select file to write to receiver
chImport=Import channels with their numbers
chAuto=Auto show channels on tp
chWarn=Show warnings

[Find]
chCase=Case sensitive
chWhole=Whole words only
chRegular","Regular expressions
grOptions=Options
grDirection=Direction=
rTop=Top to bottom=
rBottom=Bottom to top=
Find=Find
lText=Text to find:
NotFound=Search text not found!!!

[Menu]
File=File
Open=Open
New=New
Save=Save
Saveas=Save as...
ReadWrite=Read/Write eeprom
Checksum=Calculate checksum
Import=Import from...
ImpDsx=Binary file DSX
ImpBin=Binary file BIN
Export=Export to...
ExpTxt=Text file TXT
ExpDsx=Binary fie DSX
Exit=Exit
Edit=Edit
Edit2=Edit
Undo=Undo
Copy=Copy
Cut=Cut
Paste=Paste
SelectCh=Select channels
All=All
AllTv=TV
AllRadio=Radio
AllRtv=Radio and Tv
FromSat=From sat
ByStatus=By status
PinOn=Pin on
PinOff=Pin off
ActiveOn=Active on
ActiveOff=Active off
LockOn=Lock on
LockOff=Lock off
WithoutTp=Without tp
Invert=Invert selection
Duplic=Duplicated
Duplic2=Duplicated on tp
SelectTp=Select Tp
WithoutCh=Without channels
Move=Move to...
Position=Enter position:
Insert=Insert/Add
Delete=Delete
Clear="Clear
Find=Find
FindNext=Find next
View=View
Lang=Language
ToolBar=Tool Bar
ChWindow=Channel window
TpWindow=Transponder window
ViewHex=View in HEX
Config=Configuration
Base=Base channel properties
ChList=Channels list
TpList=Transponders list
Help=Help
About=About DSXEdit
Pin=PIN
Lock=Locked
Active=Active
SwapDi=Swap DiSEqC

[ChTpWnd]
lType=Type:
lSid=SID:
lActive=Active:
lLocked=Locked:
lPin=PIN:
lFreq=Frequency:
lPol=Polarisat.:
lSr=SR:
lFec=FEC:
lTid=TID:
lNid=NID:
lSat=Sat:
ShowChOnTp=Show channels on tp
bChOnTp=Channels on tp
None=None

[TpGrid]
Tp=Tp.
Freq=Frequency
Pol=Polarisation
Sr=SR
Fec=FEC
Tid=TID
Nid=NID
Sat=Satellite
Other=Other

[Eeprom]
bVerify=Verify
bClear=Clear
RW=Read/Write Settings
bConnect=Connect
bRead=Read
bWrite=Write
bDetails=Details
bConfig=Config
EEtext1=Turn off receiver by unplugging from main power.
EEtext2=Turn on receiver.
Connectfail=Connection failed!!!
Connected=Connected OK.
Sending=Sending loader file...
LdrLen=Loader length: %d bytes
Sent=Loader sent OK
NotSent=Error: Loader not send!!!
NotWork=Loader doesn't work correctly. Reset tuner!!!
NoAnswer=No answer: baud rate not set!!!
WrongAnswer=Wrong answer!!!
ReadStart=Reading started...
ReadEnd=Reading complete.
ReadErr1=Reading error at address: %04X bytes: %d. Trying again.
ReadErr2=Reading error: wrong ACK or no ACK!!!
WrStart=Writting started...
WrErr1=Writting error at address %04X. Trying again.
WrErr2=Writting aborted!!!
WrOk=Writting finished OK
Time=Time
BaudRate=Baud rate set to
Open=opened.
PleaseWait=Please wait.
CommandM=Command mode enabled.
MenuM=Menu mode enabled.
CmdErr=ERROR: Command mode not enabled!
MenuErr=ERROR: Menu mode not enabled!
LEDset=LED display text set.
LEDErr=ERROR: LED display text not set!
WorkOK=Loader works OK.
ReadErr3=Reading error: wrong ACK or no ACK!!!
ReadErr4=Reading error: wrong I2C status!!!
ClearStart=Clear started...
ClearEnd=Clear complete.
ClearErr=Clear error.
Verifytart=Verify started...
VerifyEnd=Verify complete.
VerifyErr=EEPROM different at address %4X !!!

[ChEdit]
grParam=Parameters
lName=Name
lSid=SID
lType=Type
grStat=Status
ELock=Locked
EPin=PIN
EActive=Active

[Export]
rAll=All
rSel=Selected only
rNon=None
grFmt=TXT Format
Number=Number

[Import]
grInfo=Info
rNon=None
rDontCh=Don't duplicate (SID,tp)
rDontTp="Don't duplicate NID-TID
grIns=Insert
lBefore=Before channel:
lIns=Insert before:
lChecked=Checked:
pTitle=Check
pAuto=on select
pSel=all selected
pPackets=all packets

[BaseCh]
lFreq=Frequency
lPol=Polarisation
lFec=FEC"
lSr=SR
lLow=LNB Low
lHigh=LNB High
lSubt=Subtitles
lLast=Last seen channel
grAntenna=Antenna config
lShared=Shared dish
lDual=Dual oscillator
lPolar=Polarisation control
grGeneral=General settings
PLock=Front panel lock
lFormat=Screen format
lPinMode=PIN code mode
eLine=E-line duration
lRemodul=Remodulator
lTime=Time zone